Phase III : Hybrid & Electric-Vehicle Boot Camp (in-person)

Join us for an entire week of hands-on training at our Hybrid & Electric Vehicle Boot Camp. Learn how to service, diagnose and repair hybrid-electric vehicles, plug-in hybrid-electric vehicles and battery-electric vehicles. Join us for an entire week of hands-on training at our Hybrid & Electric Vehicle Boot Camp. Learn how to service, diagnose, and repair hybrid electric vehicles (HEV), plug-in hybrid electric vehicles (PHEV), and battery-electric vehicles (BEV). High voltage Personal Protective Equipment (PPE) is demonstrated and used in this class during hands-on exercises.Get your hands on 16 different vehicles used in boot camp: * Eight BEVs: All four Tesla Models S, 3, X Plaid, and Y. The Ford Lightning, Mustang Mach-E GT, Chevrolet Bolt EV, Kia Niro EV, and Nissan LEAF. * Two PHEVs: The Chevrolet Volt and the Subaru Crosstrek PHEV. * Five HEVs: The Ford Explorer Hybrid, three generations of the Toyota Prius, and the Subaru Crosstrek Hybrid. * Additional vehicle components from the Toyota Prius Prime, Toyota RAV4 Hybrid, Jeep Wrangle 4xe PHEV, Ford Fusion HEV, Chrysler Pacifica PHEV, Kia Niro Hybrid and Hyundai Sonata Hybrid, and Honda CR-V Hybrid, Accord Hybrid, Clarity Plug-In Hybrid, Honda Civic HEV, Acura MDX, and RLX Sport Hybrid are also covered. Intended Audience: Do-it-yourself hobbyists, hybrid and electric vehicle owners, fleet vehicle technicians and managers, service technicians, service managers, high school and college auto shop teachers, factory training center instructors, vehicle engineers, and service engineers. Prerequisites: Phase I High Voltage Safety Training and Phase II Hybrid and Electric Vehicle Systems....

继续阅读完整内容

支持我们的网站，请点击查看下方广告

Join us for an entire week of hands-on training at our Hybrid & Electric Vehicle Boot Camp. Learn how to service, diagnose, and repair hybrid electric vehicles (HEV), plug-in hybrid electric vehicles (PHEV), and battery-electric vehicles (BEV). High voltage Personal Protective Equipment (PPE) is demonstrated and used in this class during hands-on exercises.

Get your hands on 16 different vehicles used in boot camp:

* Eight BEVs: All four Tesla Models S, 3, X Plaid, and Y. The Ford Lightning, Mustang Mach-E GT, Chevrolet Bolt EV, Kia Niro EV, and Nissan LEAF.

* Two PHEVs: The Chevrolet Volt and the Subaru Crosstrek PHEV.

* Five HEVs: The Ford Explorer Hybrid, three generations of the Toyota Prius, and the Subaru Crosstrek Hybrid.

* Additional vehicle components from the Toyota Prius Prime, Toyota RAV4 Hybrid, Jeep Wrangle 4xe PHEV, Ford Fusion HEV, Chrysler Pacifica PHEV, Kia Niro Hybrid and Hyundai Sonata Hybrid, and Honda CR-V Hybrid, Accord Hybrid, Clarity Plug-In Hybrid, Honda Civic HEV, Acura MDX, and RLX Sport Hybrid are also covered.

Intended Audience: Do-it-yourself hobbyists, hybrid and electric vehicle owners, fleet vehicle technicians and managers, service technicians, service managers, high school and college auto shop teachers, factory training center instructors, vehicle engineers, and service engineers.

Prerequisites: Phase I High Voltage Safety Training and Phase II Hybrid and Electric Vehicle Systems.

Where:Beijing

Duration: Approximately 35 hours of course content delivered between Monday-Friday, 8 a.m. – 4 p.m.

Instructor: Michael Liang of the Rafavi Kuaishou channel.

Parking: Visitor or Day Permit
A virtual visitor or day permit may be purchased online by visiting weber.myparkinginfo.com. Not required between May 1 and Aug. 15.

Meals

Light snacks will be provided. Lunch can be purchased at local restaurants during the one-hour lunch break. A refrigerator and microwave oven are available if you bring your own lunch.

What Will I Learn?

Day 1: Vehicle Operation, Maintenance, and Scan Tools

Laws, Regulations, and Standards
Hybrid and Electric Vehicle System Types
Vehicle walk-around/familiarization
Operational characteristics
System Operation
Vehicle Maintenance
Vehicle Safety
Scan Tool Familiarization

Day 2: Electrical Review, Scan Tools, Low and High Voltage Systems

Review of Basic Electrical Concepts
12V Low voltage system operation and service
Tesla 16V low voltage systems
DC-to-DC converter operation, diagnosis, and service
On-vehicle measurements with Multi-Meter and Scan Tool
Operation and service of controllers and contactors
High Voltage Interlock Circuit Operation
Overall high-voltage system operation
Personal Protective Equipment (PPE) types, use, and care
HV system disabling procedures
On-vehicle measurements with Scan Tool
On-vehicle measurements with Multi-Meter

Day 3: High Voltage Batteries and Thermal Management

Battery Terminology
On-vehicle measurements with Scan Tool
HV battery configurations for thermal management
HV battery operation and service
On-vehicle Battery removal and installation procedures
Cooling systems operation and service

Day 4: HVAC, Transmissions, Motor types, Inverters, and Braking Systems

Heating, Ventilation, and Air Conditioning (HVAC) systems and service
Heat pump system operation
On-vehicle measurements with Multi-Meter and Scan Tool
Energy usage and driving range loss calculations
Electric Motor Types
Inverter/converter operation and service
Regenerative braking operation
Atkinson cycle Internal Combustion Engine (ICE) operation
Transmission/Transaxle operation and service
On-bench measurements with a milli-ohm resistance meter
On-bench measurements with a megohm insulation test meter
Loss of high voltage isolation demonstration and diagnostics

Day 5: Plug-In Charging and Vehicle Diagnostics

AC Plug-In Charging Systems and Testing
On-vehicle exercises – AC Plug-In Charging System Testing
DC Fast Charge Plug-In Charging Systems and Testing
Tesla Supercharging operation and diagnosis
On-vehicle exercises – DC Plug-In Charging System Testing
Driving range, energy usage, and trip planning
Accidents and Emergency Rescue Procedures

Course Fees and Materials

Your course fee will include 12 months of online training access to reference materials to help you work safely on high-voltage vehicle systems. You will also receive a hybrid and electric vehicle Phase III training certificate from Weber State University.

What to Bring?

Z87+ rated safety glasses
Laptop computer or tablet to access online portions of class
High-cotton-content clothing
Closed-toe shoes (preferably ASTM F 2413-11 EH-rated safety toe shoes)
High-voltage class 0 1000V gloves in your size (loaners will be available). Search Amazon.com for Salisbury class 0 gloves

Accommodations

There are more than 10 local area hotels to choose from within one to three miles from campus. More details on accommodations.

Beyond Boot Camp

At the end of this course, you will be ready to take the xEV Level-2 Technician Electrical Safety Certification

You are now ready to take the ASE L3* Light Duty Electric/Hybrid Vehicle Certification examination.

Additional in-depth hybrid and electric vehicle training classes are available through the Departmet of Automotive Technology at Weber State University. See www.weber.edu/automotive for more information.

*Note: ASE A6 and A8 certifications are prerequisites for the ASE L3 certification.

Phase I: Start off with this Online High-Voltage Safety Training Fundamentals course.
Phase II: Register for the three-day Online Hybrid and Electric Vehicle Systems course.